Health and Safety Management in Beauty Salons

Health and unspoiledty Management in Beauty SalonsOutcome 1Be fitting to implement health, gumshoe and protection measure practices in the beauty beauty shop1. What is a guess opinion?A seek assessment is the process whereby the employer identifies hazards in the piece of work and analyses their dominance risk in an effort to determine or control the hazard. The employer essential inspect the layout of the beauty salon and the work activities undertaken by the round in order to rate the authorization risk of harm, accidents, or illness. essay assessments in the workplace are governed primarily by a tripartite of laws. They areThe Health Safety at educate Act 1974The Workplace (Health Safety Welfare Regulations) 1992The Management of Health Safety at Work Regulations 1999Given these laws, employers are responsible for the protection and fortress the welfare of the stave working at the salon and members of the public that visit the salon. It is also the employers responsibility to notify the mental faculty and visiting public of potential health and safety risks.A risk assessment identifies a potential hazard, identifies who might be harmed and how, determines the protection in place, evaluates the likelihood and severity of its outcome (typic everyy on a scale of 1-5), and stipulates the risk rating (typic eithery on a scale of 1-25).In the salon, for example, one potential risk is the damage and harm that could arise to both the clients and members of ply while operating Laser and IPL Equipment. By conducting a risk assessment before whateverone operates the equipment, the risk toilet be go downd, even if it cannot be all told eliminated. Normally the owner or a member of focussing, or even an outside attach to, would do a round of the premises and conduct the risk assessment before any cater or clients are allowed to engage with the workplace.A risk assessment, simply put, is a set of preemptive and calculated measures with the g oal or reducing or elimating risks and hazards in the workplace.One may determine whether a hazard poses a serious risk by looking at ultimo experience with the hazard, industry codes of best practice, information from respected organisations, testing results, information about products involved, and legislated requirements.The risks are rated after factoring in the amount of staff and clients unfastened to the risk, the severity of the risk, frequency of exposure to the risk, and the probability of the risk. Methods of hazard control complicate elimination, substitution, protective equipment, and imposed controls. each(prenominal) hazards in the workplace should be consistently monitored and reviewed and controls should be implemented based on the findings.2. What are the reasons for a risk assessment?The primary reason for a risk assessment is to remove hazards, or reduce their risk, from the workplace by adding precautions in order to create a healthier and safer environment f or staff, customers, and visitors.Risk assessments are an essential facet of a good health and safety management plan in the workplace. Risk assessments help in the following areasCreate hazard and risk wittingnessIdentify approximatelyones at risk (staff, clients, public, etc.)Create priorities for controlling hazardsPrevent injury or illnessIn a well-grounded sense, the risk assessment is important because accidents at work can be considered criminal negligence on the part of the employer as of the Health Safety at Work Act 1974. Criminal proceedings can be brought against the employer if someone is injured in their workplace. Further to this, the onus of proof is on the employer if an accident is to occur on their premises. An accident in and of itself lead be considered proof of negligence in court and it is up to the employer to provide refuting evidence. Given these legal considerations, the employer moldiness draw up a risk assessment and make employees aware of it. Th e risk assessment is important because it can remove hazards and risks before they affect someone, resulting in lengthy legal proceedings for the employer.It ordain help the salon motorbus to look at existing practices undertaken and to identify shortfalls and present potential hazards.In relation to IPL and Laser Class 4 and Class 3b, optical masers can cause damage, perchance even permanent damage, to the eyes of both the client and member of staff. This damage can be cause by looking directly at the beam or the reflection of the beam through bounce back.Laser beams can cause any of the damage listed belowBurn the skinIgnite flammable materials oestrus up fabrics and material that can release gases, debris, or hazardous fumes.Indirect hazards could include forms of radiation, gas leakage, and electric shock.There are many other associated hazards of the laser (including smoke/vapor, chemical, mechanical, and electrical), which would require a risk assessment.By carrying out a risk assessment, and evaluating the potential hazards attached to this type of equipment, it will help the owner or manager to put safety measures and controls into the salon workplace.3/How effective is a risk assessmentIn order to analyze how effective a risk assessment has been you would need to measure the outcomes. The risk assessment, in theory, needs to be put into practice for it to be effective.Staff must be aware of any kinds immediately.Once the risk assessment has been implemented, the new practices require measuring in order to be managed and the efficacy to be ob aidd. The risk assessment can serve as a set of goals and practices to put in place. Once they are put in place, the employer should outline a set of Key Performance Indicators, which will inform one of whether the measures and controls in place make been met. A simple method of measurement would be that the number of incidents ledgered in the accident scan book declines.The risk assessment is most effec tive when every person involved in the workplace is made aware of the hazards, risks, and risk assessment. Employers, employees, and clients must all be aware of their roles in protecting their own and others health and safety.An effective risk assessment communicates the needs required of each individual in a clear and easy to understand manner.The effectiveness of the risk assessment can be improved with increased commitment from all nation in the workforce, particularly those in senior management. Employers should have good social and communication skills and foster a sense of teamwork in the workplace.The following are some questions that could arise from a well thought out planAre there any hazards that have not yet been recognised in the workplace?Is it possible to get rid of hazards totally from the work place?Can the damage be reduced having identified the hazards?In order to protect the staff are the existing health and safety precautions adequate?Without increasing terms s can the standard of protection required be achieved?Have alternative cost effective ways of achieving the same standard of protection been exhausted?Have individual members of staff been approached in respect of their thoughts on the risk they face and do they understand why the preventive measures have been put in place?Is the risk assessment process being followed in the salon and are the duties of staff to report these?4. Why is it important to have health, safety and security practises in place?It is important to have these practices in place because the law requires the salon to be a safe environment for staff, clients, and visitors. If one fails to comply, one could face prosecution by an individual or company. It is important to have health and safety and security in order to protect the physical, mental, and social well being of all concerned.In short, no workers should have to work in an environment where their health, safety, or welfare is at risk. A salon that has these practices in place will be more resistant to adverse legal action and will be viewed favourably by the public.If the salon looks after its employees, they are more likely to look after the salon in return. Employers who feel valued and cared for will benefit their company in the following waysStaff morale is good workers are motivatedEfficiency is greater motivation leads to productivityProduction increasesStaff turnover rate is less (retention is improved)Insurance premiums are lowerThe employer is compliant with the lawReduction in number of absences due to illness or injuryThe companys reputation is protectedThe following are the disadvantages for not having Health and Safety and security practices in placeAccidents, in relation to IPL/Laser this could mean burn or eye damageLost wagesMedical treatmentDamage to equipment and stockLegal penalties issue of reputationDifficulty recruiting staffLoss of staffLoss of profitsIn summation, it makes good business sense to look after th e health and safety and security procedures in the salon.5. What types of health and safety and security practices would be used in a salon?There are many laws that govern the different types of health and safety and security practises used in a salon and the below list could fall under any of themAdequate toilet facilities and rest room facilities in the salonSafe and healthy equipment that have been tested and appropriately labelledFire doors clearly marked and staff being made aware of fire regulations and evacuation procedures of the salon (annual risk assessment to be carried out by employees) fire extinguishers and fire blankets are to be kept unobstructed and in constant working trailObstructions must be clearly marked in order to prevent slips, trips, and fallsRecords to be kept in the form of a log record bookService Maintenance and yearly checks on fire extinguishersAccident book and recording of any incidentsLaser fault logWorkers engaged with computing device work are to be given periodical breaks and variations in activity, including breaks that encourage stretching, posture changes, and exerciseRegular reviews of chemicals and substances used in salonStore all hazardous chemicals in the appropriate mannerYearly electrical/PAT testing of all equipment (staff to be aware and trained in the handling procedures of electrical equipment)Training and ongoing support provided to the staff for the use of equipment and the appropriate qualification before handlingStaff to report hazards or incidents to a member of managementWorkers are not to work alone for unyielding periods of time at least one other worker must be present for long stretches of timeNo Smoking rules adhered toGas safety checks by a registered corgi engineerFirst Aid Box and first aid fosterage for the staffClients records and medical information kept up to encounter and kept secure and confidential records not kept drawn-out than neededWaste is labelled correctly and disposed of co rrectly via the appropriate waste collection agencies.Staff trained not to carry anything in excess of 25kg and have waist high storage to avoid injuryEmployees and clients are to be made aware that anti-social behaviour will not be tolerated police and regime will be called in the event of any aggressive behaviour and prosecutions will be made a behavioural contract is to be signProvide adequate pedagogy to staffThe salon to be registered with the appropriate local authority for the special treatment licenceSanitize, sterilize, and disinfect equipment dailyThe salon is to have adequate insurances in placeKnow the list of Bye Laws for their local area.All employees to have the appropriate employment contracts and be on at least the national minimum wageAssessment of Noise levels within the salon no loud music talking is to be kept to extraversive volumeHealth and safety documentation to be read by all members of staffEqual Opportunities with regards to race gender and sexualityR etail products change that are reliable and dependable.If the salon has a laser /IPL Laser protection advisor to be put in place and Laser protection supervisory programAppropriate eye wear for the laser machines approved wording on areas of signs and equipment appropriate study for the laser machinesYearly audit which will cover training records, local rules, and electrical safety checksThe following are the counter measures to be put into placeThe project area will be surveyed on a monthly basis for security and safety. This includes the formal examination of all electrical sockets and fire exits must be kept clear from obstruction and clearly marked.The staff will be made aware of the conduct with which they are expected to conduct themselves. They will be aware of their roles in their own personal health and safety and that of the salon, clients, and other staff members.Any employee not complying with the rules will be warned or removed from the environment depending on the se verity of their rule breaking. Minor transgressions will pass with a warning. Serious infractions will require removal.The following risk assessments are to be carried outGeneral Risk AssessmentFire Risk AssessmentCOSHH Risk AssessmentExpectant Mother Risk AssessmentLaser risk assessment.6. Justify the proposals and recommendations for health, safety, and security practices. E.g. Data protection actAll the laws are in place in order to protect the employer and employee of the salon as well as its customers.For example, under the Data Protection Act of 1998, employees must collect adequate information, including any medical condition, employment history, convictions, and credit history, from the first visit. This information needs to be kept up to date and no longer than necessary. It must be kept safe and secure and confidential.The main justification for implementation of the Data Protection Act of 1998 is that it will minimize the risk of hazards in the workplace. Background infor mation is important for removing risk preemptively.Further to this, it is important to have non-discrimination procedures in place. This will ensure that all employees and clients are treated the same, regardless of their gender, race, age, kin status, or any other factor that does not need to be taken into account in relation to the position. One such non-discrimination policy that must be adhered to is the Equal Opportunity Act of 2010.Given the salons presence in the public care sector, it is important to follow The Provision and exercising of Work Equipment Regulations of 1998. This is important because following this regulation will determine whether an individual is correct for the job and dictates that employees must be correctly trained and the equipment is maintained.The salon must also be in accordance with the Lifting Operations and Lifting Equipment Regulations of 1998. This accordance will determine that individuals lift and handle equipment correctly and safely and ar e supplied with the knowledge to do so.7. Why is it important to follow and comply with the legislation and regulations relating to health, safety, and security practices?It is important to comply with legislation and regulations relating to health, safety, and security practices, for the following reasonsIt is a legal requirement by law as well as an integral part of the salons practice and policyIt protects the salon from legal action or legal claims and possible business closure.It protects the staff and others within the premises and creates a better working environment.It is important because it provides a happier workforce and avoids accidentsRegular reviews avoid staff self-complacencyIt will reduce staff absenceIt is an insurance policy requirementIt promotes a healthy business8. How would you manage improvements to increase compliance with health, safety and security practices?The following improvements would increase complianceEnsure that the staff of the salon have read the health and safety policy of the salonRegular risk assessments that include the laser/IPL MachineDo the necessary yearly checks required by lawEnsure the continuous professional development of the staff and provide training if necessary record all training undertakenEnsure that all the members of staff are aware of their job roles by giving them job descriptions and conducting yearly staff appraisalsKeep up to date with changes in the law and local authorityCheck insurance policies to ensure any new treatments being offered are cover9. Why is it important to be regularly evaluating health, safety and security practices in the salon?It is important to evaluate health and safety and security practices in the salon because it is a legal requirement and an insurance requirement. For example, under the Data Protection Act of 1998, it is important to ensure customer data is kept up to date and for longer than necessary by regularly reviewing that you are complying with this law.Annual testing of electrical equipment ensures the safety of the equipment and in order to comply with the Electricity at Work Regulations of 1989.Regular risk assessment provides a hazard free and safe environment. Disposing of waste correctly ensures that the Environmental Protection Act is being followed. Regular staff and client feedback allows the salon owner to make the recommended changes. Training records are kept up to date. It is important so that records can be maintained for comparisons. Methods of evaluation could be regular risk assessments including laser equipment, staff appraisals, and audit checks (with LPA to do a yearly audit).If one does not regularly review and monitor the health, safety, and security practices in the salon, one will not know whether or not the risk assessment is complete and accurate. New risks and hazards continuously present themselves. Risks that may have begun as a low priority and low likelihood may jump up the ranks and suddenly become one of high likelihood and severity.Regular evaluation does not need to be limited only to a set date (e.g. monthly or yearly) but rather can be prompted by the occurrence of certain events. These can includeBeginning a new projectA change in work environmentA change in work processAddition to machinery and toolsNew employeesMoving to a new work environmentEmployees taking on new skills and responsibilitiesNew chemicals or substancesNew information